KNX universal actuator
The KAA-8R controls lighting and heating circuits in the heating system, switches on and off the heat recovery element or underfloor heating system. In curtain system control, the KAA-8R receives information from the light sensor and then controls electric blinds or curtain systems.
KNX LED actuator/dimmer
The KAA-4R4V can control and dim all MEAN WELL’s 0(1)-10V dimmable LED power supplies.
640 mA KNX power supply
The NX-20E-640 is a 640 mA bus power supply with good efficiency and a space requirement of only 3 SU (52.5 mm). The device has a chokes output for the KNX bus and an additional output for auxiliary voltage. LED indicators show normal operation, overload conditions, and the RESET reset function. It is ideal for powering all KNX-branded products. The KNX-20-E-640 is designed as a reliable and safe solution for the KNX bus environment.
1280 mA KNX power supply
The KNX-40E-1280 is a 1280 mA bus power supply with good efficiency and a space requirement of only 4 SU (72 mm). The device has a chokes output for the KNX bus and an additional output for auxiliary voltage. LED indicators show normal operation, overload conditions, and the RESET reset function. It is ideal for powering all KNX-branded products. The KNX-40E-1280 is designed as a reliable and safe solution for the KNX bus environment.
KNX DALI gateway, KDA-6
• Can connect up to 64 DALI ECG control devices
• Built-in DALI power supply
• Lighting control via integrated web server
• 3-year factory warranty
KNX IP router, KSR-01IP
• KNX IP/TP routing
• Integrated web server
• KNX IP secure (optional)
• 3-year factory warranty
KNX USB interface, KSI-01U
• No separate power supply needed
• Addressing and parameter setting during KNX commissioning
• Support for long messages up to 220 APDU bytes
• 3-year factory warranty
KNX Line coupler, KSC-01L
• KNX TP line coupler/repeater
• Telegram filtering function
• Support for long messages up to 240 APDU bytes
• 3-year factory warranty
25W Multiple-Stage Constant Current Mode LED Driver
The LCM-KN series is a constant current LED power supply that produces regulated DC voltage. With dip switches, multiple current levels can be selected. It does not require a complex KNX-DALI bus converter when using a KNX adapter. The LCM-KN’s input voltage is 180-295V AC, and its current levels can be adjusted between 350-1400 mA. With a high efficiency of up to 90% and no need for a fan, the entire series can operate in a housing temperature range of -30…+90 °C with free air circulation. In addition, the LCM-KN series is equipped with push-button dimming and synchronization, making it structurally flexible for LED lighting systems.
60W Constant Voltage PWM Output KNX LED Driver
The PWM-KN series is a regulated DC voltage LED power supply that is based on pulse width modulation. Its 12V and 24V outputs are directly controlled via KNX. The entire series can operate in housing temperatures of -40…+90 °C. The minimum dimming level is 0.5%. Users can adjust the output frequency up to 4 kHz to comply with IEEE 1789-2015 flicker requirements.
